From now until spring, the phone rings more. Doors get held open in the wind, entrances take a beating from wet floors and grit, and power cuts catch out tired back-up batteries. A call-out that ends with “I’ll have to order the part and come back” costs a second trip, a second parking space and a customer with a door stuck open in the cold. Don’t carry everything: carry the right things for the doors you actually look after.
Start with your own door list, not a catalogue
Start with the sites you maintain. List the operators on your contracts and regular call-out sites by make and model — most engineers find a handful cover the majority of their doors — and note the faults you’ve seen on those doors over the last couple of winters. Job sheets are the best guide. Rank them by frequency and by how badly they leave the customer if you can’t fix them on the day.
That shortlist tells you which part numbers to carry. If you’re not sure which version a door takes, how to identify the right automatic door replacement part covers what to record before you order.
Small wear parts: cheap to carry, quick to fit
These small, light, easy-to-store parts turn a call-out into a ten-minute job on the van — or a return visit if they’re not.
- Floor guides take a hammering from wet grit and leaves pushed in the wind. Carry the types for your most common operators (Floor Guides & Tracks).
- Carriage and load wheels. A noisy or flat-spotted wheel is a common find. Keep wheels for your main operators in a labelled box (Carriage / Load Wheels). When a wheel isn’t enough, see Carriage Assembly Wear: When to Replace and What to Check.
- Anti-riser wheels and blocks keep leaves in the track when the wind gets up and are easy to overlook (Anti-Riser Wheels & Blocks).
- Push pad and switch spares. For radio push pads, a spare transmitter and battery, such as the Larco Transmitter & Battery, can save a trip. See Push Pads and Selector Switches.
Wet-weather sensor spares
Rain, spray and condensation are behind winter sensor complaints. Once you’ve ruled out a fault in the sensor itself, the fix is often a cover, lens or bracket — worth carrying for the sensors you see most.
- Rain and weather covers, such as the Hotron HR100 / HR94 / SSR-3 Rain Cover and the Optex OA-Edge T Rain Cover.
- Replacement lenses, end caps and mounting brackets, under Sensor Accessories.
- One or two spare sensors for the models on your busiest sites (Sensors).
For a safety beam rather than a motion sensor, our Photo Beam Sensor Faults diagnostic guide will help you rule things out before you swap parts.
Bigger items: carry for key sites, order the rest
Some parts are too bulky, too costly or too model-specific to carry for every door.
- Drive belts. Carry a belt for your most common operator. Belts are model-specific, so check before you order. See Drive Belts and our guide to identifying the right drive belt for your door operator. Folding door operators often use a separate motor belt (Motor Belts).
- Back-up battery packs are matched to the operator, so carry one only for those you see most, and note the age of packs on site so you can plan replacements ahead of a failure (Battery Packs).
- Control units, power supplies and motors are usually better ordered once you’ve diagnosed the fault. Many sit under Miscellaneous and Sliding Door Accessories.
Don’t forget the finishing parts
A repair isn’t finished until the door is safe and signed. Signage is light, so keep a few in the van. See Signage, including the Keep Clear Sign. On manual doors, check worn pivots and closers while you’re on site (Manual Door Parts).
Keep the kit working for you
- Label by operator. Boxes labelled by make and model make the right wheel or guide quick to find.
- Record what you use. Note every part you fit from van stock on the job sheet, then reorder at the end of the day or week.
- Order before 2pm. Stock parts ordered with PDC before 2pm are dispatched the same day, normally for next-day delivery, so a part used on Monday can be back on the van on Tuesday. Timed and Saturday deliveries are available at extra cost. See our delivery information.
- Review at the end of the season. If a part sat in the van all winter, it may not need to be there next year. If you’ve ordered the same part three times, carry two.
When the part isn’t in anyone’s catalogue
Older and discontinued operators are where van stock runs out, and parts can be hard to find. PDC manufactures parts in-house, so if a part is obsolete, send us the old part or a drawing and we’ll make it.
Talk to PDC about your winter stock
Not sure which parts your operators take? Our technical support is free: call before you stock up. Browse Automatic Door Parts online, call 01206 591054 or email sales@p-d-c.co.uk. Trade accounts get discounted rates, so ask when you call. Lines are open Monday to Friday, 08:30 to 17:00. You can also contact us here.