Skip to main content

Prime Door Components

Winter Van Stock: Automatic Door Spares Worth Carrying for First-Time Fixes

From now until spring, the phone rings more. Doors get held open in the wind, entrances take a beating from wet floors and grit, and power cuts catch out tired back-up batteries. A call-out that ends with “I’ll have to order the part and come back” costs a second trip, a second parking space and a customer with a door stuck open in the cold. Don’t carry everything: carry the right things for the doors you actually look after.

Start with your own door list, not a catalogue

Start with the sites you maintain. List the operators on your contracts and regular call-out sites by make and model — most engineers find a handful cover the majority of their doors — and note the faults you’ve seen on those doors over the last couple of winters. Job sheets are the best guide. Rank them by frequency and by how badly they leave the customer if you can’t fix them on the day.

That shortlist tells you which part numbers to carry. If you’re not sure which version a door takes, how to identify the right automatic door replacement part covers what to record before you order.

Small wear parts: cheap to carry, quick to fit

These small, light, easy-to-store parts turn a call-out into a ten-minute job on the van — or a return visit if they’re not.

Wet-weather sensor spares

Rain, spray and condensation are behind winter sensor complaints. Once you’ve ruled out a fault in the sensor itself, the fix is often a cover, lens or bracket — worth carrying for the sensors you see most.

For a safety beam rather than a motion sensor, our Photo Beam Sensor Faults diagnostic guide will help you rule things out before you swap parts.

Bigger items: carry for key sites, order the rest

Some parts are too bulky, too costly or too model-specific to carry for every door.

Don’t forget the finishing parts

A repair isn’t finished until the door is safe and signed. Signage is light, so keep a few in the van. See Signage, including the Keep Clear Sign. On manual doors, check worn pivots and closers while you’re on site (Manual Door Parts).

Keep the kit working for you

  • Label by operator. Boxes labelled by make and model make the right wheel or guide quick to find.
  • Record what you use. Note every part you fit from van stock on the job sheet, then reorder at the end of the day or week.
  • Order before 2pm. Stock parts ordered with PDC before 2pm are dispatched the same day, normally for next-day delivery, so a part used on Monday can be back on the van on Tuesday. Timed and Saturday deliveries are available at extra cost. See our delivery information.
  • Review at the end of the season. If a part sat in the van all winter, it may not need to be there next year. If you’ve ordered the same part three times, carry two.

When the part isn’t in anyone’s catalogue

Older and discontinued operators are where van stock runs out, and parts can be hard to find. PDC manufactures parts in-house, so if a part is obsolete, send us the old part or a drawing and we’ll make it.

Talk to PDC about your winter stock

Not sure which parts your operators take? Our technical support is free: call before you stock up. Browse Automatic Door Parts online, call 01206 591054 or email sales@p-d-c.co.uk. Trade accounts get discounted rates, so ask when you call. Lines are open Monday to Friday, 08:30 to 17:00. You can also contact us here.